Ca Cycleworks End Cap Viton O-Ring [End Cap NOT Included]

$4.73
SKU
OR-40601A
Ca Cycleworks End Cap Viton O-Ring [End Cap NOT Included] is available to buy in increments of 2

To be used in addition to our gasket G01100 for extra sealing power. 

All new generation 2V engines

Ducati Monster 1100
Ducati Monster S2R1000
Ducati Monster 1000
Ducati Monster 796
Ducati Monster 696

Ducati Hypermotard 1100
Ducati Hypermotard 796

Ducati Multistrada 1100
Ducati Multistrada 1000

Ducati Sport Classic 1000
Ducati Supersport 1000

Note: Price is per o-ring. Sold in quantities of 2.

We this o-ring in addition to our paper gasket G01100 by request of a distributor. They found that this o-ring by itself is not always enough to keep oil in the heads.

We chose these Viton o-rings for the military spec suitability for exposure to high temperatures. Your engine's cylinder heads can operate as high as 380°F -- these o-rings are designed for the task. This ExactFit™ o-ring replaces OEM part number 886.4.060.1A.

Viton is the transportation industry's top choice when it comes to fuel system sealing. Viton retains sealing force to prevent leaks even after compression for long periods in severe environments. After 100 hours in air at 150°C (302°F), Viton retains more than 90% of its original sealing force, while seals of nitrile retain 40%.

In depth: Viton is the transportation industry's top choice when it comes to fuel system sealing. Viton retains sealing force to prevent leaks even after compression for long periods in severe environments. After 100 hours in air at 150°C (302°F), Viton retains more than 90% of its original sealing force, while seals of nitrile retain 40%.

Max. Continuous Service Temperature
Viton: 204°C / 399°F
Buna/Nitrile: 121°C / 250°F
Write Your Own Review
You're reviewing:Ca Cycleworks End Cap Viton O-Ring [End Cap NOT Included]
Your Rating
Copyright © 2018-present CA Cycleworks LLC. All rights reserved.