Ca Cycleworks Airbox Intake Viton O-Ring for Ducati 916, 748, 996 (each)
Ducati Desmoquattro 996
Ducati Desmoquattro 916
Ducati Desmoquattro 748
Note: Price is per o-ring. Sold in quantities of 2
This o-ring replaced Ducati OEM part number 886.500.41A
Our Viton Fluoroelastomer O-Rings are best of practice recommended for use on engines and are rated to 400°F; further, these o-rings surface are more resistant to damage than standard BUNA / Nitrile o-ringse.
Minimum purchase: 2 at a timeIn depth: These Viton o-rings chosen for the mil-spec suitability
for exposure to high temperatures. Your engine's cylinder
heads can operate as high as 380°F. Get o-rings designed
for the task.
Max. Continuous Service Temperature
Viton: 204°C / 399°F
Buna/Nitrile: 121°C / 250°F
Viton retains sealing force to prevent leaks even after
compression for long periods in severe environments.
After 100 hours in air at 150°C (302°F), Viton retains
more than 90% of its original sealing force, while
seals of nitrile retain 40%. Buna/Nitrile is the least
expensive most readily available material.
Viton® is a registered trademark of DuPont Dow Elastomers.