Pod Filter w Air Temp Sensor Slot

Pod Filter w Air Temp Sensor Slot is available to buy in increments of 1

Ducati Hypermotard 1100 EVO and 796 (2010-2012)


Ca Cycleworks air filters to support our oversized fuel tank kit for Ducati HM796, and HM1100 with the Siemens / Continental ECU. This filter incorporates the port to hold the sensor which was in the intake boot between the airbox and throttle body. There is only one sensor, so these models need one of this filter and one of the CY-1820 without the port incorporated.

Technically, they fit all EFI 2V Ducatis as the throttle bodies are the same size. The intended use of this filter is with all parts of the intake tract before the throttle body to be removed: airbox and the rubber manifolds from airbox to the throttle bodies. The pod filters have been dyno tested to offer similar performance as with the stock airbox in place; only the noise heard with acceleration is different. 

Filters manufactured for us by sbfilters.com to ISO 5011 standards.

Write Your Own Review
You're reviewing:Pod Filter w Air Temp Sensor Slot
Your Rating
Copyright © 2018-present CA Cycleworks LLC. All rights reserved.