[Out of Stock - Estimated Restock 11/19/21] Fuel Flange Wires

[Out of Stock - Estimated Restock 11/19/21] Fuel Flange Wires is available to buy in increments of 1

Ducati Monster S2R1000
Ducati Monster S2R800 
Ducati Monster 800 w/nylon tank
Ducati Monster 695
Ducati Monster 620 w/nylon tank

Ducati Superbike 749 
Ducati Superbike 999R 
Ducati Superbike 999S

Ducati Multistrada 1100*
Ducati Multistrada 1000*
Ducati Multistrada 620
* - only 4 wires in our kit, so either fuel level gauge or level light can be used, not both.

As of October 2020, and for the near future, this part is not available. We are searching for a vendor to help us with solving this problem.

The first batch of 500 wires had put-together plugs and were completed using epoxy. The second batch of 500 wires we had to solder by hand and fill the sleeve with epoxy and those have all been sold. We will be gathering up FWIRES which failed testing and then cut them and reassemble them, however, we are missing key parts of the process. When rebuilding the 2nd batch, we cut the molded plug in such a way that we were able to use a piece of the plug to hold the wires in place for assembly. We're now going to have to find a solution for this and create a third batch of FWIRES to get us through until we can find a vendor.


This kit is to aid technicians solve the problem when the wires plug in some models breaks down and interrupts electrical connection to the fuel pump or sending unit. Installing this kit is recommended for professional technicians and advance home mechanics, thus the kit does not come with instructions.

To get an idea for the process of installing this kit, there is a YouTube video of Chris installing it and also see this forum posting to get an idea of the parts involved.

Write Your Own Review
You're reviewing:[Out of Stock - Estimated Restock 11/19/21] Fuel Flange Wires
Your Rating
Copyright © 2018-present CA Cycleworks LLC. All rights reserved.